QTL Analysis of Z414, a Chromosome Segment Substitution Line with Short, Wide Grains, and Substitution Mapping of qGL11 in Rice

Most agronomic traits of rice (Oryza sativa), such as grain length, are complex traits controlled by multiple genes. Chromosome segment substitution lines (CSSLs) are ideal materials for dissecting these complex traits. We developed the novel rice CSSL ‘Z414’, which has short, wide grains, from progeny of the recipient parent ‘Xihui 18’ (an indica restorer line) and the donor parent ‘Huhan 3’ (a japonica cultivar). Z414 contains four substitution segments with an average length of 3.04 Mb. Z414 displays seven traits that significantly differ from those of Xihui 18, including differences in grain length, width, and weight; degree of chalkiness; and brown rice rate. We identified seven quantitative trait loci (QTL) that are responsible for these differences in an F2 population from a cross between Xihui 18 and Z414. Among these, six QTL (qPL3, qGW5, qGL11, qRLW5, qRLW11, and qGWT5) were detected in newly developed single-segment substitution lines (SSSLs) S1–S6. In addition, four QTL (qGL3, qGL5, qCD3, and qCD5) were detected in S1 and S5. Analysis of these SSSLs attributed the short, wide grain trait of Z414 to qGL11, qGL3, qGL5, and qGW5. Substitution mapping delimited qGL11 within an 810-kb interval on chromosome 11. Sequencing, real time quantitative PCR, and cell morphology analysis revealed that qGL11 might be a novel QTL encoding the cyclin CycT1;3. Finally, pyramiding qGL3 (a = 0.43) and qGL11 (a =  − 0.37) led to shorter grains in the dual-segment substitution line D2 and revealed that qGL11 is epistatic to qGL3. In addition, S1 and D2 exhibited different grain sizes and less chalkiness than Z414. In conclusion, the short grain phenotype of the CSSL Z414 is controlled by qGL11, qGL3, and qGL5. qGL11 might be a novel QTL encoding CycT1;3, whose specific role in regulating grain length was previously unknown, and qGL11 is epistatic to qGL3. S1 and D2 could potentially be used in hybrid rice breeding. Supplementary Information The online version contains supplementary material available at 10.1186/s12284-022-00571-7.


Background
Grain size and weight determine rice yield and quality (Feng et al. 2021). To date, more than 400 quantitative trait loci (QTL) related to grain size have been mapped (Huang et al. 2013) and some of these have been cloned. Several signaling pathways determining grain size have been identified, including phytohormone signaling pathways, G protein signaling pathways, the ubiquitin-proteasome pathway, mitogen-activated protein kinase (MAPK) signal transduction, and pathways regulated by transcription factors (Li and Li 2016).
Several phytohormones are important in determining rice grain size, including brassinosteroids (BRs) and auxins (indole-3-acetic acid; IAA). Three QTL for grain size might be involved in BR signaling: Grain size 5 (GS5) encodes a putative serine carboxypeptidase that competitively inhibits the interaction between BRI 1-ASSOCIATED RECEPTOR KINASE 1 (OsBAK1-7) and MEMBRANE STEROID-BINDING PROTEIN 1 (OsMSBP1) thus influencing BR signaling. Higher GS5 expression levels result in wide, heavy grains caused by increased cell proliferation and expansion in spikelet hulls (Li et al. 2011;. QTL for grain length 3.1 (GL3.1) suppresses BR signaling by regulating the phosphorylation and stability of GLYCOGEN SYNTHASE KINASE 3 (GSK3)/SHAGGY-LIKE KINASE 3 (OsGSK3) (Gao et al. 2019). QTL for grain width and weight on chromosome 5 (GW5) encodes a positive regulator of BR signaling that represses GSK2 kinase activity, resulting in the accumulation of unphosphorylated Oryza sativa BRASSINAZOLE RESISTANT 1 (OsBZR1) and DWARF AND LOW-TILLERING (DLT) proteins in the nucleus to mediate BR-responsive gene expression and growth responses, thus affecting grain width (Liu et al. 2017).
Two QTL for grain size might participate in IAA signaling. Thousand-grain weight 6 (TGW6) encodes IAAglucose hydrolase. In sink organs, the Nipponbare tgw6 allele limits cell number and grain length by controlling the IAA supply. Loss of function of the Kasalath allele significantly enhances grain weight and yield (Ishimaru et al. 2013). Big grain 1 (BG1) controls grain size by positively regulating IAA responses and transport (Liu et al. 2015a).
G protein signaling is also involved in regulating grain size. In G protein complexes, the Gα subunit RICE G PROTEIN Α SUBUNIT 1 (RGA1) is important for grain expansion, and the Gβ subunit RICE G PROTEIN Β SUBUNIT 1 (RGB1) is essential for plant survival and growth. The Gγ subunit GS3 also acts as a brake in this pathway, reducing grain length by competing for binding to RGB1 to inhibit the downstream signaling of the Gγ subunits Dense and Erect Panicle 1 (DEP1) and ATYPI-CAL Gγ PROTEIN (GGC2) (Sun et al. 2018).
Ubiquitin can directly or indirectly regulate grain size by affecting protein transport, signal transduction, and protein degradation. QTL for grain width and weight 2 (GW2) encodes a RING-type E3 ubiquitin ligase that negatively regulates cell division by targeting its substrate to the proteasome for proteolysis. A deletion of 1 bp in the GW2 allele from rice cultivar WY3 causes premature termination of translation. This prevents substrates that should be degraded from being recognized, leading to increased grain length (Song et al. 2007). Large grain 1 (LG1) encodes UBIQUITIN-SPECIFIC PROTEASE 15 (OsUBP15), which possesses de-ubiquitination activity in vitro. The loss of function or downregulation of OsUBP15 leads to smaller grains (Shi et al. 2019).
MAPK cascades transmit developmental signals to their target molecules via sequential phosphorylation . OsMKKK10, OsMKK4, and OsMAPK6 act in the same MAPK pathway to positively regulate grain size (Xu et al. 2018). Grain Size and Number 1 (GSN1) is a negative regulator of the OsMKKK10-OsMKK4-OsMPK6 cascade; the gsn1 mutant has a larger grain size than the wild type (Guo et al. 2018).
Transcription factors are also important in controlling seed size. Grain size 2 (GS2) affects grain size by encoding the transcription factor OsGRF4 (Duan et al. 2015). Grain weight 8 (GW8) encodes an SBP domaincontaining transcription factor that regulates grain width by binding to the Grain weight 7 (GW7) promoter and repressing its expression .
Although several genes for grain size in rice have been cloned, our understanding of the mechanisms regulating rice grain size is incomplete. Thus, it is important to identify additional QTL for grain size. Here, we identified the chromosome segment substitution line (CSSL) 'Z414' , with short, wide grains. Z414 contains four substitution segments from the indica restorer line 'Xihui 18' as the recipient parent and 'Huhan 3' as the donor parent and addressed the following three questions: (1) how many QTL affect the traits in this line and how are they distributed in the four substitution segments? (2) If more than one QTL controls the same trait in Z414, do they exhibit independent inheritance or epistatic interactions? (3) Which of these QTL are novel?
To answer these questions, we systematically characterized Z414 and mapped QTL for associated traits in a secondary F 2 population derived from a cross between Xihui 18 and Z414. We validated these QTL and analyzed the inheritance model and pyramid effects of target QTL using single-segment substitution lines (SSSLs) and dualsegment substitution lines (DSSLs) developed in the F 3 generation. Finally, we identified candidate genes of the major QTL qGL11. Our findings will be important for breeding by design in rice.

Identification of Substitution Segments and Phenotypic Analysis of Z414
In this study, we used eight polymorphic simple sequence repeat (SSR) markers in the substitution segments of Z414, and 233 polymorphic SSR markers outside the substitution segments of this line to examine the molecular background of Z414. The substitution segments of 10 Z414 plants were consistent, and no other residual segments from Huhan 3 were detected. Z414 contains four substitution segments from Huhan 3, which are on chromosomes 3, 5, and 11. The total estimated length of the substitution segments was 12.17 Mb, and the average length was 3.04 Mb (Fig. 1).

Cytological Analysis of Z414 and Xihui 18 Glumes
Since the grain lengths and widths differed between Xihui 18 and Z414 (Fig. 3a, b), we used scanning electron microscopy (SEM) to analyze the cell morphology of Xihui 18 and Z414 glumes at the heading stage ( Fig. 3c-f ). The cell width in the inner epidermis of the glumes was significantly higher in Z414 than in Xihui 18 (+ 22.23%; Fig. 3g). There was no significant difference between Z414 and Xihui 18 in cell length of the inner glume epidermis (Fig. 3h). The total cell number in the outer epidermis of the glume along the longitudinal axis was significantly lower in Z414 than in Xihui 18 (− 13.52%; Fig. 3i). These results indicate that the short, wide grains of Z414 are mainly attributed to a decrease in glume cell number and an increase in glume cell width.

Identification of QTL Using a Secondary F 2 Population from Xihui 18/Z414
Seven QTL were identified for six traits that differed between Z414 and Xihui 18, which explained 7.00-42.50% of the phenotypic variation (Table 1). According to the setting of mapQTL, the positive genetic effect of each QTL indicated that the allele of Huhan 3 substitution segment of Z414 increased the phenotypic value, whereas the negative effect indicated that the allele of Xihui18 in substitution interval increased the phenotypic value. Thus, the additive effect of the allele qGW5 GL, grain length; RLW, ratio of length to width; GWT, 1000-grain weight; BRR, brown rice rate from a Huhan 3 substitution segment of Z414 increased grain width by 0.16 mm, and the dominant effect of qGW5/qgw5 was 0.0004, explaining 42.50% of the phenotypic variance. The additive effect of the qGWT5 allele from the Huhan 3 substitution segment of Z414 increased the 1000-grain weight by 1.25 g, and the dominant effect of qGWT5/qgwt5 was 0.15. Furthermore, qGW5, qRLW5, and qGWT5 were all linked to the same marker, RM5874. The additive of the allele qGL11 from Xihui 18 in the substitution interval increased grain length by 0.09 mm, and the dominant effect of qGL11/qgl11 was 0.012, explaining 9.61% of the phenotypic variance in grain length. Similarly, qGL11, qRLW11 and qBRR11 were all linked to the same marker, RM1812. However, the additive effects of alleles qGL11 and qRLW11 from Xihui 18 in the substitution interval increased the values of the corresponding traits, whereas the qBRR11 allele from the Huhan 3 substitution segment of Z414 increased the phenotypic value ( Fig. 1, Table 1). In addition, the additive effect of the qPL3 allele from Xihui18 in the substitution interval increased panicle length of Z414 by 1.17 cm per panicle, and the dominant effect of qPL3/qpl3 was 0.59 (Table 1).

Verification and Pyramiding of QTL Using the Newly Developed SSSLs and DSSLs
Based on the results of primary QTL mapping, we developed six SSSLs (S1-S6) and two DSSLs (D1 and D2) in the F 3 population by marker-assisted selection (MAS). Among these, S3, S4, and S5 are SSSLs with overlapping substitution segments (Fig. 4a).
Six QTL (qPL3, qGW5, qGL11, qRLW5, qRLW11, and qGWT5) were identified in the SSSLs (Fig. 4a-f ), indicating that these QTL are inherited stably. qBRR11 was not detected in S6, suggesting that the genetic effect of some minor QTL might be influenced by the environment; this QTL contributed only 7.00%. In addition, four QTL (qGL3, qGL5, qCD3, and qCD5) for grain length and degree of chalkiness were detected in S1 and S5 Xihui 18, in order as grain width (d), 1000-grain weight (e), brown rice rate (f), chalkiness degree (g), panicle length (h), grain length (i), ratio of grain length to width (j). * and ** indicate significant differences at the 0.05 and 0.01 level, respectively    (d), grain width (e), 1000-grain weight (f), and ratio of grain length to width (g). Different lowercase letters indicate a significant difference (P < 0.05), as determined by Duncan's multiple comparison. μ: the average value of each line; ai: additive effect for each QTL controlling the trait, whose positive value shows allele from substitution segment increasing phenotypic value, while negative value decreasing one. I: epistatic effect between QTL. P < 0.05in SSSL indicates that a QTL existed in the substitution segment of the SSSL, as determined by one-way ANOVA and LSD multiple comparison with Xihui 18; P < 0.05 in DSSL indicates that an epistatic effect of Q1 × Q2 existed in DSSL, as detected by two-way ANOVA. S1 (Chr.  (Table 1). The reason for this might be genetic noise from the other three substitution segments in F 2 individuals, which was cancelled out by SSSLs, meaning that QTL were detected more efficiently in SSSLs than in F 2 plants.
In this section, the positive or negative additive effect (a) of a QTL detected in substitution line indicates increasing or decreasing phenotypic value for the allele from Huhan3 substitition segment compared with recipient Xihui18.
The 1000-grain weights (34.40 and 33.43 g, respectively) of S4 and S5, containing qGWT5 (a = 3.64 and a = 2.68, respectively), were significantly larger than that of Xihui 18 (30.75 g), whereas the 1000-grain weights of the other SSSLs (S1-S3 and S6), which lack QTL for this trait, were not significantly different from that of Xihui 18. qGWT5 was localized to the same substitution interval of chromosome 5 as qGW5 ( Fig. 4f; Additional file 1).
Pyramiding of qGL3 (a = 0.43) and qGL11 (a = − 0.37) yielded an epistatic effect of − 0.62, which resulted in a 0.56 mm reduction in grain length in D2. Pyramiding of qGL3 and qGL11 resulted in shorter grains than S6 (containing qGL11) ( Table 2, Fig. 4b; Additional file 2), indicating that qGL11 is epistatic to qGL3 (Table 2). However, qGL3 (a = 0.43) and a substitution locus without a QTL for grain length on chromosome 3 in D1 showed independent inheritance. The grain length of D1 (10.25 mm) Table 2 Epistasis between QTLs in DSSL detection by two-way ANOVA "-" indicates no significant QTL in the according substitution segment of DSSL. P < 0.05 indicates additive effects of QTL or epistatic effects between QTLs existed in substitution segments of DSSL; while P > 0.05 indicates no additive effects of QTL or no epistatic effects between QTLs existed in substitution segments of DSSL

ANOVA
Model term Substitution line Chalkiness degree ( was not significantly different from that of S1 (10.35 mm), whereas these grains were significantly longer than those of Xihui 18 and S2 (Table 2, Fig. 4b, Additional file 2). Pyramiding two substitution loci without QTL for 1000grain weight on chromosomes 3 and 11 in D2 produced an epistatic effect of − 4.88, resulting in a 4.88 g decrease in 1000-grain weight in D2. Thus, the 1000-grain weight of D2 (28.99 g) was significantly lower than that of S1, S6, and Xihui 18 (32.65, 31.98, and 30.75 g, respectively) ( Fig. 4f; Additional file 2). All the other QTL in D1 and D2 were independently inherited ( Table 2; Fig. 4c, d, e, g; Additional file 2).

Substitution Mapping and Candidate Gene Analysis of qGL11
Based on the above results, we further analyzed qGL11 using S6, whose estimated and maximum substitution lengths were 1.42 Mb and 1.66 Mb, respectively (Fig. 5a). For fine mapping of qGL11, we developed five novel secondary SSSLs (S7-S11) by crossing Xihui 18 with S6. Based on substitution mapping, qGL11 was delimited to an estimated substitution interval of 405 kb and a maximum length of 810 kb (Fig. 5a). Ninety genes were identified in this interval of 810 kb, including 40 genes with specific functional descriptions and 50 genes with poorly elucidated functions, such as expressed protein, or retrotransposon protein. Among 40 genes, LOC_Os11g05850 (CycT1;3) was selected as the candidate gene for qGL11 based on the signaling pathway regulating grain size (Li and Li 2016) and observations of the cell morphology of Z414 glumes. A comparison of the DNA sequences of Xihui 18 with S6 revealed six single nucleotide polymorphisms (SNPs) and a 25-base pair insertion in the 5′ untranslated region (UTR), one SNP in the 3′ UTR, and one SNP in the coding sequence that did not cause an amino acid change (Fig. 5b). Furthermore, the protein structure of CycT1;3 was predicted by SWISS-MODEL (https:/swissmodel.expasy.org/) (Arnold et al, 2006). There was no difference between S6 and Xihui 18 (Fig. 5c). However, the expression levels of LOC_ Os11g05850 were significantly higher in the sheaths and panicles of S6 than in Xihui 18 (Fig. 5d). Thus, this suggests that LOC_Os11g05850 (CycT1;3) might be the gene responsible for qGL11.

Discussion
Restorer lines are important for breeding hybrid rice varieties. Xihui 18 is an elite indica rice restorer line developed by Southwest University in Chongqing, China. This variety has many advantages, such as good combining ability, large panicles, multiple grains per panicle, and long, narrow grains. In this study, we constructed the novel CSSL Z414, with short, wide grains, in the Xihui 18 genetic background. Z414 carries four chromosome substitution segments from the donor Huhan 3. None of these substitution segments contained the fertility restoration genes Rf1, Rf2, Rf3, or Rf4 (Akagi et al. 2004;Itabashi et al. 2011;Cai et al. 2013), indicating that Z414 is restorative. Z414 has seven traits that are different from Xihui 18: it has short, wide, larger grains; shorter panicles; higher brown rice rate; and a greater degree of chalkiness. Z414 is not suitable for use as a rice restorer line because of its high degree of chalkiness. However, its near isogenic background makes it an ideal material for genetic analysis. Through genetic dissection, we obtained six novel SSSLs (S1-S6) and two DSSLs (D1, D2) harboring the target QTL. Compared to Xihui 18, S1 carries qGL3 and qCD3 and exhibits both long grains and a lower degree of chalkiness. D2 harbors qGL3, qGL11 and qCD3, where qGL11 is epistatic to qGL3, and has shorter grains and a lower degree of chalkiness. S4 contains qGW5, qRLW5 and qGWT5; it has long, wide, large grains and the same degree of chalkiness as Xihui 18. S6 carries qGL11 and qRLW11 and has short, narrow grains and the same degree of chalkiness as Xihui 18. Low chalkiness improves rice grain quality .
It is important to breed rice cultivars with different grain sizes based on consumer preferences (Feng et al. 2021;Liang et al. 2021). These four SSSLs could potentially be used as restorer lines to breed novel hybrid rice varieties. S5, with short, wide grains (qGL5, qGW5, qGWT5, qRLW5) and a high degree of chalkiness (qCD5), could be used to study the mechanisms underlying the formation of these traits. Zhang (2021) argued that SSSLs are helpful for rapidly screening traits hidden in the genomes of different donors, making a large amount of previously unexplored genetic variation rapidly available to plant breeders and geneticists, and making the genetic variation directly usable for breeding. SSSLs represent a new resource that could greatly enrich conventional rice breeding (Zhang 2021). The novel SSSLs identified in this study represent an unusual gene pool for genetic research on grain quality and for rice breeding. These SSSLs should be important in allele discovery and research on rice breeding by design.

qGL11, qRLW11, qCD3 and qBRR11 might be Novel QTL
To further explore the QTL, we developed a secondary F 2 segregation population from a cross between Xihui 18 and Z414 and generated six SSSLs (S1-S6) and two DSSLs (D1, D2). Twelve QTL were responsible for the seven traits that differed between Z414 and the parental line. Based on analysis of these QTL, the short grains of Z414 were controlled by qGL11, qGL3 and qGL5, which were identified in S6, S1 and S5, respectively. The wide grains of Z414 were explained by qGW5, which was validated by examining the phenotypes of S4 and S5. The large grains of Z414 were attributed to qGWT5 (verified by examining S4 and S5). The short panicles of Z414 were explained by qPL3 (validated by examining S1). The higher brown rice rate of Z414 was explained by qBRR1. qCD5 and qCD3 (detected in S5 and S1) accounted for the higher degree of chalkiness of Z414.
OsAPC6 and OspPLAIIIα can be acted as candidate genes for qPL3 based on their physical locations and biological functions. OsAPC6 interferes with the gibberellin signaling pathway and leads to reduced cell size (Awasthi et al. 2012). OspPLAIIIα encodes glycoprotein-related Black regions indicate the estimated length of the substitution segment. b DNA sequence of CycT1;3 in S6 compared with Xihui 18. In the candidate gene sequence, the red box represents the coding sequence, the white boxes represent the 5′ UTR and 3′ UTR, the solid red lines represent introns, the black line in the gene sequence represents the mutation site, and the arrow represents a sequence change from Xihui18 to S6. c Protein structure of CycT1;3 predicted by SWISS-MODEL. d Relative expression levels of the candidate gene CycT1;3 in root, stem, leaf, sheath, and panicle tissue of Xihui 18 versus S6 phospholipase A and reduces panicle length (Liu et al. 2015b). qGW5 for grain width, qGL5 for grain length, qRLW5 for the ratio of length to width, and qGWT5 for 1000-grain weight are located within the interval of RM405 to RM17984 on chromosome 5. GS5 and OsTAR1 are potential candidate genes of these QTL based on analysis of the substitution interval. GS5 positively regulates grain size, as grain width and weight are correlated with its expression level . OsTAR1 encodes tryptophan aminotransferase, an IAA biosynthesis gene that regulates the production of IAA in the developing rice grain, together with OsYUC9 and OsYUC11 (Abu-Zaitoon et al. 2012). OsYUC11-mediated auxin biosynthesis is essential for endosperm development .
qGL3 is located in a similar region to PGL1, OsLG3, TUD1 and OsOFP19. PGL1 encodes an atypical basic helix-loop-helix protein that does not bind DNA. Overexpressing PGL1 increases grain length (Heang and Sassa 2012). OsLG3 positively regulates grain length, but has no effect on grain quality . TUD1 encodes an E3 ubiquitin ligase of the U-box family, which participates in the BR response and interacts with the heterotrimeric G protein subunit D1 to regulate BR-mediated plant growth (Hu et al. 2013). OsOFP19, OSH1, and DLT might form a functional complex that regulates cell proliferation and cell growth .
qCD5 is located in a similar region to Chalk5. Chalk5 encodes a vacuolar H+-translocating pyrophosphatase that increases the chalkiness of the endosperm by disturbing the pH homeostasis of the endomembrane trafficking system in developing seeds (Li et al. 2014). Although some of these genes have been cloned, compared with their identification in mutants, such genes will become more useful in breeding once they have been identified in SSSLs. Consequently, these alleles are important for both biodiversity research and pyramid breeding based on the genetic background of Xihui 18. To the best of our knowledge, qGL11, qRLW11, qCD3 and qBRR11 have not been previously reported. These QTL could be used for fine mapping, cloning, and functional analysis to explore the genetic mechanisms underlying these traits.

qGL11 Might be a Novel QTL Encoding CycT1;3, Which has a Previously Unknown Function in Regulating Grain Length
Elucidating the molecular mechanism underlying grain size is important for rice breeding by design. Here, through substitution mapping of qGL11 using six SSSLs (S6-S11) with overlapping substitution segments, qGL11 was delimited to an 810-kb maximum substitution interval on chromosome 11. This interval contains 90 genes, including 40 genes whose functions have been described, and 50 genes whose functions were not well elucidated. Among the various genes associated with grain size that have been cloned to date, most are involved in phytohormone pathways, G protein signaling pathways, the ubiquitin-proteasome pathway, the MAPK signal transduction pathway, and pathways regulated by transcription factors (Li and Li 2016). Among the 40 candidate genes, only CycT1;3 was identified as a candidate gene for qGL11. DNA sequencing and real time quantitative PCR analysis of Xihui 18 compared with S6 revealed differences in both the DNA sequences and gene expression levels of CycT1;3 in sheaths and panicles, indicating that CycT1;3 might be a strong candidate for qGL11. CycT1;3 encodes a cyclin protein involved in progression of the cell cycle during mitosis. Cytological analysis showed that the shorter grains of Z414 are caused by a decrease in cell number in glumes rather than a decrease in cell length, suggesting that qGL11 is related to the cell cycle during meiosis. There have been many studies on cell cycle regulation in yeast and animals, but few in plants. Cell proliferation in plants is mainly controlled by a superfamily of cyclin-dependent kinases. Whereas A-, B-, D-, and E-type cyclins have been described in plants (Nieduszynski et al. 2002), there are few reports on T-type cyclins. Therefore, T-type cyclins in plants would be worth studying in the future. Qi et al. (2012) reported that GL3.1 encodes OsPPKL1, which directly uses Cyclin-T1;3 as a substrate to phosphorylate Cyclin-T1;3; the downregulation of the Cyclin-T1;3 gene in rice resulted in shorter grains. However, how CycT1;3 affects grain development remains unknown. In this study, although we detected qGL3 in S1 and found that qGL11 is epistatic to qGL3, OsPPKL1 was not localized to the same interval in S1. Thus, qGL11 might be a novel QTL. These results lay the foundation for the indepth study of qGL11.

Conclusions
We constructed the novel short, wide grain rice CSSL Z414, which carries four substitution segments in the genetic background of indica restorer line Xihui 18. Z414 displays seven traits that are different from those of Xihui 18; namely, differences in grain length, grain width, ratio of length to width, 1000-grain weight, brown rice rate, degree of chalkiness, and panicle length. We identified 11 QTL associated with these seven traits in Z414, which were identified in six novel SSSLs (S1-S6) and two novel DSSLs (D1, D2). The short grain trait of Z414 is controlled by qGL11, qGL3 and qGL5. Cytological analysis, DNA sequencing, and real time quantitative PCR analysis indicated that qGL11 might be CycT1;3, whose specific role in regulating grain length was previously unknown, suggesting that qGL11 might be a novel QTL. In particular, S1 carries qGL3 and qCD3 and exhibits both long grains and a lower degree of chalkiness. D2 harbors qGL3, qGL11 and qCD3, where qGL11 is epistatic to qGL3, and thus displays shorter grains and a lower degree of chalkiness. These substitution lines could be directly used as restorer lines to breed novel hybrid rice varieties.

Plant Materials
Z414 was developed from Xihui 18 as the recipient parent and Huhan 3 as the donor parent. Xihui 18 is an elite indica rice restorer line bred by Southwest University, with characteristics including good combining ability, large panicles and multiple grains, and narrow, long grains. Huhan 3 is a japonica variety, with strong stress resistance and short, wide grains. To identify polymorphisms between Xihui 18 and Huhan 3, 429 simple sequence repeat (SSR) markers covering the whole rice genome were used. Of these, 241 polymorphic markers were then selected to develop CSSLs beginning in the BC 2 F 1 generation; 20 plants per line were selected in each generation. CSSL Z414, a line with short, wide grains with four substitution segments, was identified in the BC 3 F 7 population. Chromosome substitution segments were identified as described by Ma et al. (2019), and the estimated lengths of the chromosome substitution segments were calculated as described by Paterson et al. (1991).

Rice Planting and Cultivation
Xihui 18 was crossed with Z414 to obtain hybrid seeds at the experimental station of Southwest University, Chongqing, China, in July 2018. The hybrid seeds were planted at the Lingshui base in Hainan Province in September of the same year, and the F 1 seeds were harvested. On March 10, 2019, seeds of Z414, Xihui 18, and the F 2 population of 150 plants were sown at the experimental station of Southwest University. Thirty seedlings of each parental line and all F 2 individuals were transplanted to the field on April 20, with 26.4 cm spacing between rows, 16.5 cm between hills, and 10 plants per row. On March 12, 2020, eight individuals were selected from the F 2 population to develop SSSLs and DSSLs. These plants, as well as Z414 and Xihui 18, were transplanted at the experimental station of Southwest University, using 30 plants per line. On March 10, 2021, six SSSLs and two DSSLs together with Xihui 18 and Z414 were planted in Chongqing, again with 30 individuals transplanted per line. Conventional management practices were applied.

Assessment of Agronomic Traits and Quality Parameters
During the maturation period, 10 plants each of Xihui 18 and Z414, the six SSSLs, and the two DSSLs were harvested, together with 150 individuals of the F 2 population. Eleven yield-related traits were investigated: plant height, panicle number per plant, panicle length, spikelet number per panicle, grain number per panicle, seedsetting rate, grain length, grain width, ratio of length to width, 1000-grain weight, and yield per plant. The specific methods followed Wang et al. (2020).
Five quality parameters were analyzed, referring to the national standard GB/T5495-2008. First, 10 g grain tissue from Xihui 18, Z414, the 150 F 2 individuals, six SSSLs, and two DSSLs were ground into brown rice. The brown rice was milled into polished rice using a CLS.JNM-1 rice husker, and the brown rice rate and head rice rate were calculated. The chalky rice rate and degree of chalkiness were measured using all head rice for each sample with a Wanshen SC-E instrument. The gel consistency was measured as described in Tang et al. (1991).
The mean values of each trait were used for further analysis.

Scanning Electron Microscopy of Z414 and Xihui 18 Glumes
Following the completion of the booting stage and before the heading period, the inner and outer epidermal cells of Xihui 18 and Z414 glumes were examined under a Hitachi SU3500 scanning electron microscope (Hitachi, Tokyo, Japan) with a frozen stage (− 40 °C) under vacuum.

QTL Mapping
The QTL mapping population was a secondary F 2 population comprising 150 individuals derived from crosses between Xihui 18 and Z414. The improved cetyltrimethylammonium bromide (CTAB) method described by McCouch et al. (1988) was used to extract DNA from the parents and 150 F 2 individuals. PCR amplification, polyacrylamide gel electrophoresis, and rapid silver staining were carried out as described by Zhao et al. (2016). Xihui 18 lanes were scored as "a", Z414 lanes were scored as "b", heterozygous lanes were scored as "h", and the absence of marker lanes was scored as "u". Based on the lanes of each marker located in the substitution segment of Z414, together with the phenotypic value of individuals of the F 2 population, Interval Mapping (IM) with MapQTL 6.0 (Van Ooijen 2009) was used to identify QTL. The LOD threshold of significant QTL was calculated by a permutation test with a genome-wide significance level of P < 0.05 and permutation tests = 1000. The QTL with a LOD > 2.5. The determination of QTL depended on the highest peak LOD and the directions of additive effects. The positive genetic effect of each QTL indicated that the allele of Huhan 3 substitution segment of Z414 increased the phenotypic value, whereas the negative effect indicated that the allele of Xihui18 in substitution interval increased the phenotypic value.

Development of SSSLs and DSSLs
Based on the results of QTL mapping in 2019, eight individuals with the target segment and few heterozygous markers were selected from the F 2 population and used to develop SSSLs and DSSLs by MAS. Individuals were planted as a single line (Z728-Z735) in 2020. The leaves of 20 individuals per line were collected and used to extract DNA for genotyping for MAS using both the target substitution markers and residual heterozygous markers. The SSSLs and DSSLs were developed based on the rule that each substitution line carried only the homozygous target substitution segment, while the lanes of other markers were same as those of Xihui 18.
Ten plants each of the six SSSLs, two DSSLs, and Xihui 18 were harvested from each plot after maturity in August 2021. All traits were measured again using the same methods as in 2019.

Validation of Target QTL in the SSSLs
Each SSSL i (S1-S6) was given the hypothesis (H0) that no QTL existed in the substitution segment of the SSSL i . When the P value was less than 0.05 according to oneway analysis of variance (ANOVA) and LSD multiple comparison with Xihui 18 by each SSSL i in IBM SPSS Statistics 23.0, we denied the hypothesis and considered that a QTL for a certain trait existed in the SSSL i . According to the genetic model, in a certain environment (same year and same experimental field and no replicate plot designed) P 0 = μ 0 + ε for Xihui 18 and P i = μ 0 + a i + ε for an SSSL carrying a specific QTL, where P 0 and P i represent the phenotypic value of any plant in a plot of Xihui 18 and the SSSL i . μ 0 represents the mean value of the Xihui 18 population, a i represents the additive effect of the QTL from substitution segment of donor Huhan3, whose positive effect indicates increasing phenotypic value and negative one shows decreasing phenotypic value in substitution lines, and ε represents residual error.
Thus, the additive effect of the QTL was calculated as the difference between the mean phenotypic values of the SSSL and Xihui 18 ). All calculations were conducted using Microsoft Excel 2016.

Analysis of Epistatic Interactions Between Target QTL in the DSSLs
For each DSSL ij , the hypothesis (H0) that two loci (Q1 and Q2) for a certain trait located in the "i" and "j" substitution segments were independently inherited was expressed as "2 + 0 = 1 + 1". When the P value was greater than 0.05 for Q1 × Q2 using two-way ANOVA in IBM SPSS Statistics 23.0, we accepted the hypothesis that Q1 and Q2 in DSSL ij were independently inherited. At this time, the phenotypic value of (Xihui 18 + DSSL ij ) was the same as that of (SSSL i + SSSL j ). By contrast, when the P value was less than 0.05 for Q1 × Q2, we denied the hypothesis and considered that an epistatic interaction occurred between the two allelic loci Q1 and Q2, namely "2 + 0 ≠ 1 + 1". According to the genetic models, P 0 = μ 0 + ε for Xihui18, P i = μ 0 + a i + ε for SSSL i, P j = μ 0 + a j + ε for SSSL j and P ij = μ 0 + a i + a j + I ij + ε for DSSL ij , where P ij represents the phenotypic value of any plant in a plot of the DSSL ij ; μ 0 represents the mean value of the Xihui 18 population; a i and a j represent the additive effect of QTL in substitution segment i and j, respectively; and I ij represents the a i a j epistatic effect between QTL in substitution segment i and j. Thus, the epistatic effects between non-allele QTL were the difference between the mean phenotypic values of (Xihui 18 + DSSL ij ) and (SSSL i + SSSL j ) ). Finally, we used IBM SPSS Statistics 23.0 to conduct multiple comparisons of all SSSLs and DSSLs as well as Xihui 18.

Overlapping Substitution Mapping and Candidate Gene Analysis of qGL11
To develop secondary SSSLs for qGL11, S6 was crossed with Xihui 18 in 2020. Five SSSLs (S7-S11) with overlapping substitution segments were developed from the cross in 2021. The maximum and estimated substitution length of the secondary SSSLs were estimated based on the marker positions (Paterson et al. 1991). QTL were located by substitution mapping . When grain length significantly differed between a secondary SSSL and Xihui 18, a QTL for grain length was detected in the substitution segment of the SSSL. When multiple substitution segments in SSSLs with the target trait overlapped, the QTL was localized to the overlapping region . The additive effect of the QTL was calculated as half the difference between the mean phenotypic values of the SSSL and Xihui18 . Within the estimated substitution intervals, we predicted the candidate gene information and combined this information with gene annotations to identify possible candidate genes of qGL11 using Gramene (http:// www. grame ne. org/), the Rice Annotation Project Database (https:// rapdb. dna. affrc. go. jp/), and the China National Rice Database Center (http:// www. riced ata. cn/). The candidate gene sequence was downloaded, including 3000 bp before the start codon (ATG) and 1500 bp after the stop codon. Primers were designed using Vector NTI to amplify the target fragments using Xihui 18 and S6 DNA as templates. The amplicons were sequenced by Tsingke Biological Technology Co., Ltd. (Chongqing, China).

Total RNA Extraction and Real Time Quantitative PCR Analysis
Total RNA was extracted from root, stem, leaf, sheath, and panicle tissue of Xihui 18 and S6 at the booting stage using an RNAprep Pure Plant RNA Purification Kit (Tiangen, Beijing, China); reverse transcribed using the GoScript Reverse Transcription System; and quantitatively analyzed on a Bio-Rad CYF96 system using Real-time PCR Master Mix (TaKaRa Biotechnology (Dalian, China) Co. Ltd.). The rice gene Actin (LOC_Os03g50885) was used as the internal control to normalize all data.